SimRacing Portugal Forum
Marcaçoes nos layouts - Printable Version

+- SimRacing Portugal Forum (https://www.simracingportugal.net/forum)
+-- Forum: Simuladores (https://www.simracingportugal.net/forum/forumdisplay.php?fid=4)
+--- Forum: LiveForSpeed (https://www.simracingportugal.net/forum/forumdisplay.php?fid=22)
+---- Forum: Ajuda (https://www.simracingportugal.net/forum/forumdisplay.php?fid=35)
+---- Thread: Marcaçoes nos layouts (/showthread.php?tid=115)



Marcaçoes nos layouts - angel_ghost - 01-12-2008

ola pessoal

andei a fazer uns layouts só que desde que saiu a patch Z, o LYTe(prog especifico para fazer layouts) o programa nao é compativel. procurei no lfs forum actualizaçoes ou outro metodo mas nao encontrei nada :confused:.
como tal, estou a fazer os layouts diretamente pelo jogo(da mais trabalho) so que bloqueio quando quero defenir uma meta/partida e sectores. opçoes que davam pelo LYTe mas pelo jogo nao encontro soluçao.

alguem sabe como posso de momento fazer estas marcaçoes?

um abraço


Marcaçoes nos layouts - Vitor Dengucho - 01-12-2008

Eu nunca criei layouts portanto não te posso falar por experiência, mas se ainda não o fizeste, dá uma olhadela a esta página do LFS Manual: http://en.lfsmanual.net/wiki/Autocross .



Marcaçoes nos layouts - angel_ghost - 01-12-2008

" Placing checkpoints

You need one finish line and at least one checkpoint. In effect this defines the circuit, and also gives you split times at those points. Pressing F or 1, 2, 3 gives you a finish line or a checkpoint. You can adjust their direction and width in the same way as you do for objects, by pressing the M key. Checkpoints are invisible when driving - it is up to the person who edits the track to make sure the user drives through them, by using cones or other objects. The W and E keys can be used to set the width of a checkpoint.

NOTE : direction is important with checkpoints. You must drive over a checkpoint in the correct direction or no time will be recorded.

A checkpoint looks like a square bracket, and you must drive FROM the side with the "ends" of the square bracket and over TO the "flat side" of the square bracket."


brigadão ;) tinha mesmo o que presisava.